Kenwood KDC-X494 User Manual
6
|
KDC-X494/ KDC-MP445U/ KMR-440U
General opreration
Removing the Faceplate
The faceplate of the unit can be detached and taken
with you, helping to deter theft.
with you, helping to deter theft.
Detaching the Faceplate
Press the Release button.
Reattaching the Faceplate
Refer to the following diagram when
reattaching the faceplate.
reattaching the faceplate.
¤
•
Remove the faceplate at once after pressing the Release
button; otherwise it can fall down due to vibration.
button; otherwise it can fall down due to vibration.
•
The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts.
damaged by shocks or jolts.
•
Keep the faceplate in its faceplate case while detached.
•
Do not place the faceplate (and the faceplate case) in areas
exposed to direct sunlight, excessive heat or humidity. Also
avoid places with too much dust or the possibility of water
splashing.
exposed to direct sunlight, excessive heat or humidity. Also
avoid places with too much dust or the possibility of water
splashing.
Muting the audio upon reception of
phone call
phone call
The audio system automatically mutes when a call
comes in.
comes in.
When a call comes in
“CALL” is displayed.
The audio system pauses.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The “CALL” display disappears and the audio system
comes back ON.
The “CALL” display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The “CALL” display disappears and the audio system
comes back ON.
The “CALL” display disappears and the audio system
comes back ON.
⁄
•
To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (Quick
Start Guide).
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (Quick
Start Guide).