Konica Minolta ip-432 User Manual
14-4. Function List
133
VI Appendix Chapter 14 Appendix
Deleting unnecessary function specifications
If memory overflows occur frequently, it is recommended that the copier's memory be expanded.
The hard disk does not operate normally
If the main power is switched off while the hard disk is operating, data may stop writing correctly and the
hard disk may stop operating normally. If the hard disk is not operating normally, initialize the hard disk
with the procedure below.
hard disk may stop operating normally. If the hard disk is not operating normally, initialize the hard disk
with the procedure below.
1
Switch on the copier power. The [Main menu] screen is displayed.
MEMO
z
For details on the procedure for displaying the [Main menu] screen, [Please ask your administrator].
2
Touch the [5] key.
3
Touch the [OK] key.
→ A screen to confirm whether or not to initialize the hard disk is displayed.
→ A screen to confirm whether or not to initialize the hard disk is displayed.
4
Touch the [1] key.
5
Touch the [OK] key.
→ When the formatting ends, [Switch the power off, then on again] is displayed.
→ When the formatting ends, [Switch the power off, then on again] is displayed.
6
Switch the copier power switch Off, wait about 10 seconds, then switch the power back On
again.
If the above procedure does not restore normal operation of the hard disk, contact your service
representative.
again.
If the above procedure does not restore normal operation of the hard disk, contact your service
representative.
Caution
● After switching Off the Copier main power, if you switch it back on without waiting, the print controller
may not operate normally and errors may be displayed.
In this case, if you switch the Copier main power Off again, wait at least 10 seconds or so, then switch
the main power On again, the system will operate normally.
In this case, if you switch the Copier main power Off again, wait at least 10 seconds or so, then switch
the main power On again, the system will operate normally.
Important
● When the hard disk is initialized, all of the downloaded font information will be erased.
Also the print setting and the controller setting will reset to the factory default.
14-4. Function List
This lists the PCL printer driver setting items (Adobe PostScript if the PostScript option is installed).
For details on the function settings, [Chapter 3 Printing from Windows]
For details on the function settings, [Chapter 3 Printing from Windows]
(
(