Kenwood KDC-MP146 User Manual

|

KDC-MP246/ KDC-MP146/ KDC-MP3046/ KDC-MP2046/ KDC-MP1046

Bend the tabs of the mounting 
sleeve with a screwdriver or similar 
utensil and attach it in place.

⁄

•  Make sure that the unit is installed securely in place. If the 

unit is unstable, it may malfunction (for example, the sound 
may skip).

  Refer to the section <Removing the Hard Rubber 

Frame> and then remove the hard rubber frame.

  Align the holes in the unit (two locations on each 

side) with the vehicle mounting bracket and secure 
the unit with the accessory screws.

8 mm
 MAX.

ø5mm

ø5mm

8mm
 MAX.

T

N

T

N

T/N

T: Toyota cars
N: Nissan cars

Accessory

3...for Nissan car

Accessory

4...for Toyota car

3

4

  Engage the catch pins on the removal tool and 

remove the two locks on the upper level.
Upper the frame and pull it forward as shown in 
the figure.

Catch

Lock

Accessory

2

Removal tool

  When the upper level is removed, remove the 

lower two locations.

⁄

•  The frame can be removed from the bottom side in the 

same manner.

  Refer to the section <Removing the Hard Rubber 

Frame> and then remove the hard rubber frame.

  Detach the faceplate.

  Insert the two removal tools deeply into the slots 

on each side, as shown.

  Lower the removal tool toward the bottom, and 

pull out the unit halfway while pressing towards 
the inside.

Accessory

2

¤

•  Be careful to avoid injury from the catch pins on the 

removal tool.

  Pull the unit all the way out with your hands, being 

careful not to drop it.

¤

Install this unit in the console of your vehicle. 
Do not touch the metal part of this unit during and 
shortly after the use of the unit. Metal part such as 
the heat sink and enclosure become hot. 

B64-4595-00_00_en.indd   18

09.10.8   10:55:47 AM