ZyXEL Communications NXC8160 User Manual
Chapter 8 Maintenance Screen
NXC-8160 User’s Guide
70
The following table describes the labels in this screen.
8.2 Configuring Syslog & Monitor
Use this screen to configure to where the NXC-8160 is to send logs and how often a log will
be sent. Click Maintenance > Syslog & Monitor. The screen appears as shown.
be sent. Click Maintenance > Syslog & Monitor. The screen appears as shown.
Table 23 Access Points
LABEL
DESCRIPTION
Show
Configuration
Click the Configuration file link to display the NXC-8160’s currect configuration
settings. You can right-click the link and select Save Target As... to back up your
configuration to an XML file on your computer. The backup configuration file will be
useful in case you need to return to your previous settings.
Upload
Configuration
Load a configuration file from your computer to your NXC-8160. Type in the location
of the file you want to upload in this field or click Browse ... to find it.
Browse...
Click Browse... to find the file you want to upload. Remember that you must
decompress compressed (.ZIP) files before you can upload them.
Upload
Click Upload to begin the upload process.
Upgrade
Firmware
Find firmware at www.zyxel.com in a file that (usually) uses the system model name
with a .bin extension, for example, "NXC-8160.bin". The upload process uses
HTTPs (Hypertext Transfer Protocol over SSL) and may take up to two minutes.
After a successful upload, the system will reboot.
Type in the location of the file you want to upload in this field or click Browse ... to
Type in the location of the file you want to upload in this field or click Browse ... to
find it.
Browse...
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upgrade
Click Upgrade to begin the upload process. This process may take up to two
minutes.
Current Time
(24h)
This field displays the NXC-8160’s present time and date
Set Time & Date Specify the time and date manually. Click Update to change the time and date
immediately.
Reboot
Controller
System restart allows you to reboot the NXC-8160 without turning the power off.
Click Reboot to restart the NXC-8160 to have your new settings take effect
Click Reboot to restart the NXC-8160 to have your new settings take effect
immediately. Restart is different to reset; reset returns the device to its default
configuration.
Apply Settings
Not all new changes on the NXC-8160 need a system reboot to take effect. Click
Apply to apply your changes immediately when a system reboot is not required.
Back to Factory
Defaults
Click the Restore button to clear all user-entered configuration information and
return the NXC-8160 to its factory defaults.