Xerox 4213 User Manual
LJ SERIES 2D EMULATION
1-sided/2-sided
Purpose
The 4213 can print on one side (1-sided) or both sides (2-sided)
of a page.
of a page.
Syntax
E
&l#S
Hex
1B 26 6C # 53
Dec
27 38 108 # 83
where #
= 0 is 1-sided
#
= 1 is 2-sided, long-edge binding
#
= 2 is 2-sided, short-edge binding.
2-sided printing is not supported in the LJ Series 2D emulation
when the manual bypass feature is used.
when the manual bypass feature is used.
Left Offset Registration
Purpose
This command specifies the position of the logical page across
the width (short side) of the physical page.
the width (short side) of the physical page.
Syntax
E
&l#U
Hex
1B 26 6C # 55
Dec
27 38 108 # 85
where #
is a positive or negative number expressed in
decipoints (1/720th inch) and valid up to four decimal places. A
positive value moves the logical page to the right along the
width of the physical page except on the back side of sheets
printed in long-edge-binding 2-sided mode, where the logical
page moves to the left. A negative value moves the logical page
to the left, except on the back side of sheets printed in long-
edge-binding 2-sided mode, where it moves to the right.
positive value moves the logical page to the right along the
width of the physical page except on the back side of sheets
printed in long-edge-binding 2-sided mode, where the logical
page moves to the left. A negative value moves the logical page
to the left, except on the back side of sheets printed in long-
edge-binding 2-sided mode, where it moves to the right.
Notes
•
Page orientation has no effect on this command.
•
The value # represents an absolute move in relation to the
default position of the logical page and not the current
position.
default position of the logical page and not the current
position.
•
Positioning the logical page outside the printable area may
cause loss of data.
cause loss of data.
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
3-15