ZyXEL Communications PLA401 v2 User Manual

PLA-4xx Series User’s Guide

The following tables summarize the PLA-4xx’s hardware and firmware features.

Table 15   Hardware Specifications

Dimensions (W x D x H)  PLA-400/400 v2/402 v2 

112 (L) mm x 106 (D) mm x 28.5 (H) mm
PLA-470 
162 (L) mm x 118 (D) mm x 40 (H) mm
PLA470 v2 
162 (L) mm x 118 (D) mm x 35 (H) mm
PLA-401/PLA401 v2
97 mm (L) x 45 (H) mm x 70 (W) mm 

Power Input

PLA-400/401 v2
100 - 240 VAC, 50/60 Hz, 0.12 A
PLA-400 v2/402 v2
100 - 240 VAC, 50/60 Hz, 0.13 A
PLA401/470/470 v2
100 - 240 VAC, 50/60 Hz, 0.2 A

Ethernet Port

Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex 

mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.

RESET

Pressing this button in for less than 3 seconds resets the device to factory 

default settings. Network Name becomes HomePlugAV.
Pressing this button in for more than 10 seconds resets the firmware to the 

previous version.

ENCRYPT

Pressing this button in for less than 3 seconds begins the connection setup 

process.
Pressing this button in for more than 10 seconds resets the network name 

to a random value.

Coaxial Port

Operation Environment

PLA-400/401/400 v2/470/470 v2
Temperature: 0º C ~ 45º C
Humidity: 5% ~ 95% Noncondensing
PLA401 v2/PLA402 v2
Temperature: 0º C ~ 45º C
Humidity:10% ~ 85% Noncondensing

Storage Environment

PLA-400/401/400 v2/470/470 v2
Temperature: -10º C ~ 70º C
Humidity: 10% ~ 85% Noncondensing
PLA401 v2/PLA402 v2
Temperature: - 20º C ~ 60º C
Humidity: 10% ~ 90% Noncondensing