Kenwood VR 8070 User Manual

1 Remove the cover.

2 Insert the batteries.

3 Close the cover.

• Insert two AA-size (R6) batteries as indicated by the polarity markings.

When the STANDBY indicator is lit, the power turns ON when you press
the POWER RCVR key on the remote control. When the power comes
ON, press the key you want to operate.

• When pressing more than one remote control key successively, press

the keys securely by leaving an interval of 1 second or more between
keys.

Notes
1. The supplied batteries may have shorter lives than ordinary batteries

due to use during operation checks.

2. When the remote-controllable distance gets shorter than before,

replace both batteries with new ones.

3. Placing the remote sensor in direct sunlight, or in direct light from a

high frequency fluorescent lamp may cause malfunction.
In such a case, change the location of the system installation to prevent
malfunction.

FM indoor antenna (1)

AM loop antenna (1)

Remote control unit (1)

Batteries (R6/AA) (2)

RC-R0827

If any accessories are missing, or if the unit is damaged or fails to operate,
notify your dealer immediately. If the unit was shipped to you directly,
notify your shipper immediately. Kenwood recommends that you retain
the original carton and packing materials in case you need to move or ship
the unit in the future.
Keep this manual handy for future reference.

Remote sensor

POWER RCVR

6 m

*5453/01-09/EN

04.6.16, 3:33 PM

4