ZyXEL Communications prestige 2602h series User Manual
Prestige 2602H/HW Series User’s Guide
106
Chapter 5 Wireless LAN (P2602HW Models)
5.8 Configuring RADIUS
To set up your Prestige’s RADIUS server settings, click WIRELESS LAN, RADIUS. The
screen appears as shown.
screen appears as shown.
Figure 39 RADIUS
The following table describes the fields in this screen.
Password
Enter a password of up to 31 printable characters (including spaces; alphabetic
characters are case-sensitive) if you’re using MD5 encryption and maximum 14 if you’re
using PEAP.
Back
Click Back to go to the main wireless LAN setup screen.
Apply
Click Apply to save these settings back to the Prestige.
Cancel
Click Cancel to begin configuring this screen again.
Table 25 Local User Database (continued)
LABEL
DESCRIPTION
Table 26 RADIUS
LABEL
DESCRIPTION
Authentication Server
Active
Select Yes from the drop-down list box to enable user authentication
through an external authentication server.
Server IP Address
Enter the IP address of the external authentication server in dotted decimal
notation.
Port Number
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs
You need not change this value unless your network administrator instructs
you to do so with additional information.