ZyXEL Communications prestige 2602h series User Manual

Prestige 2602H/HW Series User’s Guide

288

Chapter 22 Maintenance

Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a 
"*.bin" extension, e.g., "Prestige.bin". The upload process uses HTTP (Hypertext Transfer 
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.  
See 

 for upgrading firmware using FTP/TFTP commands.

Only use firmware for your device’s specific model. Refer to the label on the bottom of your 
device.

Click Firmware to open the following screen. Follow the instructions in this screen to upload 
firmware to your Prestige. 

Figure 141   Firmware Upgrade

The following table describes the labels in this screen.

Note: Do not turn off the Prestige while firmware upload is in progress!

After you see the Firmware Upload in Process screen, wait two minutes before logging into 
the Prestige again. 

Table 98   Firmware Upgrade

File Path 

Type in the location of the file you want to upload in this field or click Browse ... to find it.

Browse... 

Click Browse... to find the .bin file you want to upload. Remember that you must 

decompress compressed (.zip) files before you can upload them. 

Upload 

Click Upload to begin the upload process. This process may take up to two minutes.

Reset

Click this button to clear all user-entered configuration information and return the 

Prestige to its factory defaults. Refer to the Resetting the Prestige section.