ZyXEL Communications prestige 2602h series User Manual
Prestige 2602H/HW Series User’s Guide
Chapter 26 Menu 3 LAN Setup
305
C
H A P T E R
26
Menu 3 LAN Setup
This chapter covers how to configure your wired Local Area Network (LAN) settings.
26.1 LAN Setup
This section describes how to configure the Ethernet using Menu 3 — LAN Setup. From the
main menu, enter 3 to display menu 3.
main menu, enter 3 to display menu 3.
Figure 150 Menu 3 LAN Setup
26.1.1 General Ethernet Setup
This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You
seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain
packets, reduce traffic and prevent security breaches.
seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain
packets, reduce traffic and prevent security breaches.
Figure 151 Menu 3.1 LAN Port Filter Setup
If you need to define filters, please read
first, then return to this menu
to define the filter sets.
26.2 Protocol Dependent Ethernet Setup
Depending on the protocols for your applications, you need to configure the respective
Ethernet Setup, as outlined below.
Ethernet Setup, as outlined below.
Menu 3 - LAN Setup
1. LAN Port Filter Setup
2. TCP/IP and DHCP Setup
1. LAN Port Filter Setup
2. TCP/IP and DHCP Setup
5. Wireless LAN Setup
Enter Menu Selection Number:
Enter Menu Selection Number:
Menu 3.1 - LAN Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel: