Xerox 3225 User Manual
QMS 3825/3225/2025 User's Guide
3-22
Replacing the Ozone
Filter
Replacing the Ozone Filter
The ozone filter is located on the left side of the printer behind a
vented covering. To replace the filter
vented covering. To replace the filter
5 Pull out the used
transfer/separation
charger, and dispose of
it properly. Lower the A1
lever, and then insert a
new transfer/separation
charger, being careful
not to touch the clear
plate. Return the lever to
its original position.
charger, and dispose of
it properly. Lower the A1
lever, and then insert a
new transfer/separation
charger, being careful
not to touch the clear
plate. Return the lever to
its original position.
6 Close the front cover.
1
Remove the vented
cover by pushing the
latch at the top of the
cover and pulling the
cover up and away from
the printer.
cover by pushing the
latch at the top of the
cover and pulling the
cover up and away from
the printer.
B
A
4
0000119
A
2
A
1
PULL
A1 lever
,,,
,,,
,,,
,,,
,,,
,
O
1