Haier hl22xslw2 User Manual

Installation

To get the best picture quality, adjust the VGA 

A

graphics card to 1024 s768.

Use the TV’s VGA or DVI (Digital Visual Interface) 

B

Audio IN port for audio connections, depending on 
your computer connector.

If the graphic card on the computer does not 

output analog and digital RGB simultaneously, 
connect only one of either VGA IN or HDMI IN to 
display the VGA on the TV.
If the graphic card on the computer does output 

analog and digital RGB simultaneously, set the TV 
to either VGA or HDMI; (the other mode is set to 
Plug and Play automatically by the TV.)

Then, make the corresponding audio connection. 

C

If using a sound card, adjust the VGA sound as 
required.

PC/DVI AUDIO IN

PC IN

9*$,

1

Turn on the computer and the TV.

A

Use INPUT on the remote control to select VGA or 

B

HDMI source.

Check the image on your TV. There may be noise 

C

associated with the resolution, vertical pattern, 
contrast or brightness in VGA mode. If noise 
is present, change the VGA mode to another 
resolution, change the refresh rate to another rate 
or adjust the brightness and contrast on the menu 
until the picture is clear. If the refresh rate of the VGA 
graphic card can not be changed, change the VGA 

graphic card or consult the manufacturer of the VGA 
graphic card.

Use a DVI cable.

R

Avoid keeping a fixed image on the TV’s screen 

R

for a long period of time. The fixed image may 
become permanently imprinted on the screen.

The synchronization input form for Horizontal and 

R

Vertical frequencies is separate.

Y

VGA

640s480

60Hz

SVGA

800s600

60Hz

75Hz

XGA

1024s768

60Hz

75Hz

After subscribing to a cable TV service from a local 
provider you can watch cable TV programming. The TV 
cannot display TV programming unless a TV tuner
device or cable TV converter box is connected to the TV.
For further information regarding cable TV service, 
contact your local cable TV
service provider(s).

Select 3 or 4 with channel switch on cable box. 

A

Tune the TV channel to the same selected output 

B

channel on cable box.

Select channels at the cable box or with the cable 

C

box remote control.

Connect the audio and video cables from the Cable 

A

Box's output jacks to the TV input jacks, as shown in the 
figure.When connecting the TV to a Cable Box, match 
the jack colors (Video = yellow, Audio Left = white, and