Vulcan Materials c24ea5 User Manual

— 15 —

•

Deliming material

•

Funnel

•

Plastic or rubber gloves

•

Safety goggles or face shield

•

Measuring cup

•

1-gallon container for mixing deliming
solution

•

Petrol-Gel Lubricant or equivalent food-
grade grease for coating deliming port
threads

Note: Deliming solution may cause the surface

of aluminum measuring tools to tarnish or
etch.

Note: This procedure is not intended to take

the place of a water treatment program.

1. Turn power switch OFF. Wait 5 minutes for

steam generator to completely drain and the
drain valve to close.

2. Turn cooking timers to OFF.

3. Prepare deliming solution according to the

instructions on the deliming material
package. Follow all manufacturer's
instructions.

4. Remove delime port cap on top of unit and

insert funnel into delime port (Figure 4).

WARNING: THE  STEAMER  AND  ITS  PARTS

ARE  HOT.  USE  CARE  WHEN
OPERATING,  CLEANING  OR
SERVICING  THE  STEAMER.  THE
COOKING  COMPARTMENT
CONTAINS  LIVE  STEAM.  STAY
CLEAR  WHEN  OPENING  DOOR.

A water treatment system is recommended for
the steamer. Refer to your supplier's manual for
normal maintenance procedures for proper
scale-free operation.

The steamer should be delimed when symptoms
occur (see Troubleshooting Chart). This is in
accordance with the minimum preventive
maintenance schedule required by the
Warranty.

WARNING: READ  AND  FOLLOW  THE  IN-

STRUCTIONS  ON  THE  DELIMING
MATERIAL  PACKAGE.  AVOID
CONTACT  WITH  SKIN  AND
EYES.  WEAR  PLASTIC  OR
RUBBER  GLOVES  AND  SAFETY
GOGGLES  WHEN  HANDLING.
WASH  THOROUGHLY  AFTER
HANDLING.  IF  DELIMING
SOLUTION  COMES  IN  CONTACT
WITH  THE  SKIN  OR  EYES,
RINSE  THOROUGHLY  WITH
CLEAN  WATER.

WARNING: THE  STEAMER  AND  ITS  PARTS

ARE  HOT.  USE  CARE  WHEN
OPERATING,  CLEANING  OR
SERVICING  THE  STEAMER.
THE  COOKING  COMPARTMENT
CONTAINS  LIVE  STEAM.  STAY
CLEAR  WHEN  OPENING  DOOR.