Microboards Technology hcl-6000 User Manual

 

Quick Erasing... 
0/25 

Microboards B.30 
1. Copy         (SM) 

Microboards B.30 
10. Hard Drive Setup 

Hard Drive Setup 
1. Select Partition 

Choose Partition 
 1->[RESERVED] CD 

Choose Partition 
 2->[DVD1

 

   ] DVD 

The “0” indicates that zero discs have been erased so far. The “25” 
indicates the number programmed into the counter. Once all the discs have 
been erased, you will see one of these PASS/FAIL screens:  

 

PASS 25 FAIL 0 
Job Completed! Press OK to 
Finish 

or: 

Input Bin Empty (20) 
Reset Hoppers?

 

¾ 

“PASS 25” indicates 25 discs have 
been erased successfully. 

 
¾ “FAIL 0” indicates none of the discs 

have failed erase. 

  
Press the   OK button to finish 

 

¾ “Input Bin Empty (20)” indicates that the 

system has run out of discs to erase. 

 
If you have more discs to erase, you can 
empty the Output Spindle; place the discs 
to be erased in the Input Spindle and 
Press the   OK button to continue.  
 
If you have no more discs to erase, press 
the 

  ESC  button to terminate the 

operation. 

 

The Hard Drive Setup menu consists of following sub-menus:  

Each of these menus is discussed in its own subsection.  
 
If you are at the 1. Copy Menu, do the following: 

 
Use the   Up or   Down button to find the 10. Hard Drive Setup.  
 
 
 
Press the   OK button on 10. Hard Drive Setup to enter the menu. Use the 

 Up or   Down button to select between those options. 

 

 
10.1 Select Partition  
The Select Partition submenu is used to select the partition on the Hard Drive that will be used as the default 
partition choice for various Hard Drive related tasks.  

 
Press the   OK button to enter the Select Partition menu.  
 

 

Use the   Up or 

  Down  button  to select the desired partition. The 

RESERVED partition is reserved for use by the System under Multi-Master 
mode.  
 

 

Press the   OK button to select the desired partition (named DVD1 in this 
example).