ICOM f70t User Manual
29
4
BIIS OPERATION
■ BIIS indication
The following indications are available for the BIIS operation
on a BIIS channel.
on a BIIS channel.
CONNECT : Individual/group call is successful.
OK
OK
: Message (status or SDM) transmission is suc-
cessful.
FAILED
: No answer back is received.
WAIT
: Appears during retry of the call (2nd call).
CLR DOWN : End the communication.
BUSY
BUSY
: Operating channel is in the busy condition.
■ Priority A channel selection
When one of the following operations is performed, the trans-
ceiver selects the Priority A channel automatically.
ceiver selects the Priority A channel automatically.
Priority A is selected when;
• Clear down signal is received/transmitted
- Set the ‘Move to PrioA CH’ item as ‘Clear down.’
• Turning the power ON
The Priority A channel is selected each time the transceiv-
er power is turned ON.
er power is turned ON.
• Status call
The Priority A channel is selected when transmitting a sta-
tus call.
- Enable the ‘Send Status on PrioA CH’ item in the BIIS
tus call.
- Enable the ‘Send Status on PrioA CH’ item in the BIIS
configuration.
4
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 29 (1,1)