ICOM f80t User Manual
11
2
PANEL DESCRIPTION
2
TONE/NAC CH SELECT KEY “TSEL”
(LMR (P25 Conventional) operation only)
➥ While in the analog mode operation, push to select the
(LMR (P25 Conventional) operation only)
➥ While in the analog mode operation, push to select the
continuous tone channel using [CH Up] or [CH Down] to
change the tone frequency/code setting.
change the tone frequency/code setting.
➥ While in the digital mode operation, push to select the NAC
channel using [CH Up] or [CH Down] to change the NAC
code setting.
code setting.
➥ While in the mixed (digital and analog) mode operation,
push to select the continuous tone channel using [CH Up]
or [CH Down] to change the tone frequency/code setting.
Then push this key to enter the setting. After that, the NAC
channel selection screen appears. Select the NAC chan-
nel using [CH Up] or [CH Down] to change the NAC code
setting. Then push this key to enter the setting.
or [CH Down] to change the tone frequency/code setting.
Then push this key to enter the setting. After that, the NAC
channel selection screen appears. Select the NAC chan-
nel using [CH Up] or [CH Down] to change the NAC code
setting. Then push this key to enter the setting.
D For Digital mode operation only
INDIVIDUAL KEY “INDV”
Push to enter the individual ID code selection mode directly.
Then select the desired individual ID code using [CH Up]/[CH
Down]. (p. 16)
Push to enter the individual ID code selection mode directly.
Then select the desired individual ID code using [CH Up]/[CH
Down]. (p. 16)
TALKGROUP KEY “TGID”
Push to enter the talkgroup ID code selection mode directly.
Then select the desired talkgroup ID code using [CH Up]/[CH
Down]. (p. 16)
Push to enter the talkgroup ID code selection mode directly.
Then select the desired talkgroup ID code using [CH Up]/[CH
Down]. (p. 16)
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 11 (1,1)