Terratec sine mb 33 ii User Manual
Recording sound changes
Procedure:
n Connect the MIDI OUT of the SINE MB 33 II to the MIDI IN of the MIDI recording
device (e.g. computer, hardware sequencer, etc.). Sound changes are generally
made while playing a melody sequence on the SINE MB 33 II. Connect the MIDI OUT
of the SINE MB 33 II to the MIDI IN of the MIDI recording device.
made while playing a melody sequence on the SINE MB 33 II. Connect the MIDI OUT
of the SINE MB 33 II to the MIDI IN of the MIDI recording device.
n
n
n
n
n
n
Setting the MIDI channel: Please note that notes must be received and controller data
sent on the same MIDI channel (MIDI channel setting on the rear panel of the SINE
MB 33 II).
sent on the same MIDI channel (MIDI channel setting on the rear panel of the SINE
MB 33 II).
Set the EDIT MODE switch to NORM.
Activate the recording function of the MIDI recording device while playing a melody.
Change the sound by modifying a control setting. The SINE MB 33 II sends controller
messages (controller number of the control and its value, i.e. the current position of
the control) when a control is changed.
messages (controller number of the control and its value, i.e. the current position of
the control) when a control is changed.
Note: if more than one parameter is changed at the same time, the SINE MB 33 II
will send the controller data of all changed parameters on the selected MIDI
channel.
will send the controller data of all changed parameters on the selected MIDI
channel.
Playback of sound changes
The SINE MB 33 II has two operating modes—NORM and MOVE—to process controller
data received at MIDI IN. Both modes can only process controller data sent on the MIDI
channel currently selected on the SINE MB 33 II.
data received at MIDI IN. Both modes can only process controller data sent on the MIDI
channel currently selected on the SINE MB 33 II.
14
SINE MB 33 II (English)