rototherm sentry digital panel indicator setup guide User Manual
16
20-5110 Issue B
Alarm Setpoint 1
Default: 100.0
Defines the alarm setpoint for Alarm 1 in display units.
As Alarm Setpoint 1 if Alarms 2 and 3 are fitted.
Relay 1
Default: True
Defines the operation of Relay 1, which can be in either the
energised alarm state (
energised alarm state (
truE
) or the de-energised alarm state (
FLSE
).
As Relay 1 if Alarms 2 and 3 are fitted.
A100
Default: 100.0
Defines the display value which corresponds to 20mA from the
optional analogue retransmission.
optional analogue retransmission.
A0
Default: 0.0
Defines the display value which corresponds to 4mA from the
optional analogue retransmission.
optional analogue retransmission.
Key 1
On units fitted with the front panel buttons, the following
functions may be assigned to either or both function keys: zero, tare,
display high (maximum) or low (minimum) value since last reset or reset
of the high and low values to the current measured value.
functions may be assigned to either or both function keys: zero, tare,
display high (maximum) or low (minimum) value since last reset or reset
of the high and low values to the current measured value.
Key 2
As for Key 1.
Default
Default: Off
Allows the instrument to be returned to its factory supplied
setup.
setup.
dFLt
KEY2
KEY1
A0
A100
rEL2
rEL3
rEL1
SP-2
SP-3
SP-1
Sentry Digital Panel Indicator
Setup Guide