Terratec clockwork qr User Manual

10

SyncXtension EWS ClockWork (English)

If the Clock IN bus receives a good signal, both blue LEDs in the slot plate will indicate this

(each for WordClock or SuperClock). If the EWS ClockWork Modul is last in a Word or Super-

Clock chain the termination will have to be activated by means of DIP switch 4. Switch 1

(WordClock / SuperClock switch) is idle in this mode since the module adjusts to the external

Clock format present.

Should you operate an external device in this operation mode via the S/PDIF Interface of the

EWS-Master card, please remember that this device can only be synchronised in record mode

In play back mode, an S/PDIF device without Word-/SuperClock connection only functions

according to its own internal clock generator. Even if the sample rate of the S/PDIF device cor-

responds with that of the Clock-Master the sources will nevertheless run unsynchronised and

this will result in distortions during play back. In such case it is advised to choose the mode

"Master: External S/PDIF (ADAT™) IN" described on the following pages.