Terratec sine mixer v1.0 User Manual

Function

The SINE SLE 82 mixer has 4 stereo channels, i.e. 8 separate inputs. These inputs are
intended for signals amplified to line levels such as keyboards, preamps, drum computers
and the like. Please do not connect microphones or electric guitars directly to the mixer.

The sockets of the effects loop are located on the rear panel (one mono Effect Send and
one mono Effect Return, as well as one stereo Effect Return socket).

Please use the included 12 V AC power adapter to connect the SINE SLE 82 Mixer to an
AC power source. The LED on the front panel indicates that the device is operational (no
on/off switch).

The INPUTS (rear panel) can be used as follows:

External source

SINE SLE 82

Stereo (2 mono outputs)

INPUT left and right

Stereo (1 stereo output)

INPUT left (stereo jack)

Mono (1 mono output)

INPUT right (mono jack)

When properly connected, the SINE SLE 82 mixer automatically recognizes the connec-
tion type. This also applies to the outputs.

The VOLUME controls regulate the total volume of each channel pair, while the
BALANCE controls regulate the relative volumes of the left and right sides.

The MASTER VOLUME control regulates the overall volume of all connected audio
sources and adjusts the SINE SLE 82 to suit a main mixer or recording interface, as well
as controlling the headphone volume.

Technical data

Input level

- 14 dB

Output impedance

600 ohm

Signal-to-noise ratio >97 dB

Headphone

1.3 mW/600 ohm

Input impedance

22 kohm

Gain

- 00 to 28 dB

Frequency response 4 Hz – 20 kHz

Dimensions

482.6 x 87 x 44 mm (19”, 1U)

SINE SLE 82, SLM 82, SLM 162 (English)