rose-displays supersnap with slatwall hangers User Manual
Parts
SuperSnap
12S300
SuperSnap™
Step 1
Snap the SuperSnap open and insert
poster (top and bottom). Fig. 1
Note: It is easier to open and close the
SuperSnap by starting at one end and
working your way down the holder.
poster (top and bottom). Fig. 1
Note: It is easier to open and close the
SuperSnap by starting at one end and
working your way down the holder.
Step 2
To close, snap the SuperSnap shut. Fig.
2
2
Step 3
Insert hangers into upper portion
of slatwall. Hangers will rest on lower
portion of slatwall. Fig. 3
Note: To ensure that the SuperSnap
hangs level use two hangers placed an
equal distance in from each side of the
frame.
of slatwall. Hangers will rest on lower
portion of slatwall. Fig. 3
Note: To ensure that the SuperSnap
hangs level use two hangers placed an
equal distance in from each side of the
frame.
Step 4
Place the SuperSnap on the hangers
using the bottom channel of the top rail.
Fig. 4
using the bottom channel of the top rail.
Fig. 4
Step 5
Push end caps into place. Fig 5
Important note:
Please save and reuse the
SuperSnap, Slatwall hangers and
End Caps for future projects.
SuperSnap, Slatwall hangers and
End Caps for future projects.
Instruction Sheet
Instructions for assembly
Incept-7.05.02
The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSSuperSnapSlatwall
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSSuperSnapSlatwall
Figure 2
Figure 4
Figure 1
SuperSnap
Slatwall Hangers
06-6068S
Figure 5
End Caps
06-5475
Figure 3
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com