jetway 866asur2a User Manual

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

(6)  Speaker connector: SPEAKER  
 

This 4-pin connector connects to the case-mounted speaker. See the figure below. 

The Power LED is light on while the system power is on.  Connect the Power LED 
from the system case to this pin.  

This 2-pin connector connects to the case-mounted power switch to power ON/OFF the 
system.

 

 

 

 

 

 
(9)  Wake On-LAN/Modem Headers (3-pin) :  WOL, WOM 

This connector connects to a LAN/Modem card with a WAKE ON-LAN/Modem 
output.  This connector power up the system when a wake up signal is received through 
the LAN/Modem card. 

NOTE:  This feature requires that Wake On LAN or Ring In Wake up is enabled.  
 

 

 

 

 

 

 

These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the 
fan manufacturer, the wire and plug may be different.  The red wire should be positive, 
while the black should be ground.  Connect the fan’s plug to the board taking into 
consideration the polarity of connector.