jetway i848asr1a User Manual

 
 
 
                                                                                                                                                                                                                                                                                                                                                

 
 
 

 

Time 
The time format is <hour><minute><second>.  

Primary Master/Primary Slave 
Secondary Master/Secondary Slave 
Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type.  Note that the specifications of 
your drive must match with the drive table.  The hard disk will not work properly if you enter 
improper information for this category.  If your hard disk drive type is not matched or listed, you 
can use Manual to define your own drive type manually. 

If you select Manual, related information is asked to be entered to the following items.  Enter the 
information directly from the keyboard.  This information should be provided in the 
documentation from your hard disk vendor or the system manufacturer. 
If the controller of HDD interface is SCSI, the selection shall be “None”. 
If the controller of HDD interface is CD-ROM, the selection shall be “None” 
Access Mode 

The settings are Auto Normal, Large, and LBA. 

Cylinder   

number of cylinders 

number of heads 

Precomp   write 

precomp 

Landing Zone landing 

zone 

Sector 

 

number of sectors 

 

↑↓→←