jetway v623dmr1a User Manual

Page of 48
 
 
 
                                                                                                                                                                                                                                                                                                                                                
 
 
 
 
10                 
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software 
Miscellaneous Control 
 
Item Help 
 
   Auto Detect DIMM/PCI Clk        Enabled 
   Spread Spectrum                 Disabled  
   ** Current Host/PCI Clock is 133/133 MHz ** 
   Host/PCI Clock at Next Boot is  133/33MHz 
   ** Current DRAM Clock is 133MHz ** 
   DRAM Clock at Next Boot is      133MHz 
   +2.5V Select                    2.55V 
    
 
 
 
 
 
 
 
 
  Menu Level > 
  
   
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 
F5:Previous Values  F6:Optimized Defaults F7:Standard Defaults 
 
WARNING!  The Design of this motherboard follows chipset and CPU vender’s design 
guideline. Any attempts to push beyond product specification are not 
recommended and you are taking your own risk to damage your system or 
important data.  Before over clocking, you must make sure your 
components are able to tolerate such abnormal setting, especially CPU, 
memory, hard disks, and VGA cards.  
 
 
2-4  Install Memory 
This motherboard provides 
two
 184-pin DUAL INLINE MEMORY MODULES (DIMM) 
sites for memory expansion available from minimum memory size of 64MB to maximum 
memory size of 2.0GB DDR SDRAM. 
Valid Memory Configurations 
Bank 
184-Pin DIMM 
PCS
Total Memory 
Bank 0, 1  (DDR1) 
DDR200/DDR266   
DDR SDRAM Module 
X1 
64MB
∼1.0GB 
Bank 2, 3  (DDR2) 
DDR200/DDR266  
DDR SDRAM Module 
X1 
64MB
∼1.0GB 
Total 
System Memory (Max. 2.0GB) 
64MB
∼2.0GB 
 
Generally, installing DDR SDRAM modules to your motherboard is very easy, you can refer 
to figure 2-4 to see what a 184-Pin DDR200/DDR266 DDR SDRAM module looks like.