jetway s450r2a User Manual

 
 
 
                                                                                                                                                                                                                                                                                                                                                

 
 
 

 

This 2-pin connector connects to the case-mounted reset switch for rebooting your 
computer without having to turn off your power switch.  This is a preferred method of 
rebooting in order to prolong the lift of the system’s power supply.  See the figure 
below. 

 

This 4-pin connector connects to the case-mounted speaker. See the figure below. 

The Power LED is light on while the system power is on.  Connect the Power LED 
from the system case to this pin. 

This 2-pin connector connects to the case-mounted power switch to power ON/OFF the 
system. 

 

 

 

 

This connector connects to a LAN card with a WAKE ON-LAN output.  This connector 
power up the system when a wake up signal is received through the LAN/Modem card. 

NOTE:  This feature requires that Wake On LAN or Ring In Wake up is enabled.  

 

 

 

 

 

   

These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the 
fan manufacturer, the wire and plug may be different.  The red wire should be positive, 
while the black should be ground. Connect the fan’s plug to the board taking into 
consideration the polarity of connector.