jazzmutant lemur User Manual
21
Now we’ll configure the IP address manually. Choose Manually from the Configure IPv4
menu.
menu.
• Set the first two numbers of the IP address to 169.254. Set the next two numbers to
anything that does not match the Lemur’s IP address as shown in the Settings
window on the touchscreen. For instance, if the Lemur’s IP address is displayed as
169.254.0.2, you can enter 169.254.0.74.
window on the touchscreen. For instance, if the Lemur’s IP address is displayed as
169.254.0.2, you can enter 169.254.0.74.
Next, set the Subnet Mask to 255.255.0.0:
Your computer should now be ready to talk to your Lemur.
Windows XP Direct Configuration
These settings only apply to connecting your computer to your Lemur
directly with a single Ethernet cable. For other configurations (which we
recommend if you use a router), see the section below entitled Using a
Lemur in a Local Area Network.
directly with a single Ethernet cable. For other configurations (which we
recommend if you use a router), see the section below entitled Using a
Lemur in a Local Area Network.