silent-knight sk-5207 User Manual

Page of 1
Model 5207 Fire Alarm
Built-in Touchpad Operating Instructions
These instructions must be framed and displayed next to the Model 5207 panel
in accordance with NFPA 72 fire code for Local Protected Fire Alarm Systems.
Function
Keystrokes
System test*
0 ENTER
Reset alarms (or smoke detectors)*
1 ENTER
Clear alarm memory*
2 ENTER
Reset dialer
3 ENTER
 + code 0 or 1
Start download
4 ENTER
 + code 0 or 1
Alarm memory display
5 ENTER
Display troubles
6 ENTER
Silence troubles or alarms*
7 ENTER
 + code, or 
SILENCE  + code
Disable/Enable zones
Zone # + 
DISABLE
Begin fire drill
2 0 ENTER
 + code 0 or 1
The system sounds an alarm and reports a fire test when you exit fire drill mode.
End fire drill
SILENCE
 + code 0 or 1
Walk test
2 2 ENTER
 + code
Zone Troubleshooting mode
2 5 ENTER
 + code
Step Programming mode
2 7 ENTER
 + code 0
Function
Keystrokes
Set date*
For example, to set
the date of Jan. 13,
1995, enter:
0 1 1 3 9 5
8 ENTER  + 6-digit date
Use mmddyy format for date, where:
mm = Month (enter leading 0 for 1-digit months)
dd   = Day (enter leading 0 for 1-digit days)
yy   = Year
Set time*
For example, to set
the time of Wed.,
4:30 p.m., enter:
3 1 0 4 3 0
9 ENTER  + 6-digit date
Use wdhhmm format for time, where:
w   = Day of week (0=Sun., 1=Mon., 2=Tue.,
  3=Wed., 4=Thu., 5=Fri., 6=Sat.)
d    = Time of day (0=AM, 1=PM)
hh  = Hour (enter leading 0 for 1-digit hrs.)
mm = Minutes
 
(enter leading 0 for 1-digit min.)
To exit download, set date, and set time modes, press  CLEAR  CLEAR .
*  These functions do not require you to enter a valid operating code unless the
NEED CODE AT PANEL option is selected during programming.
For service call:
Form # 150486
Basic Operation of Built-in Touchpad