hubbell-lighting sss-2 piece User Manual
1. Remove the protective wrap from both pole pieces.
2. Locate the hardware bag which includes four 3/8" bolts.
3. Orient the pole top to the pole base so the fixture(s) can be installed in the proper locations.
4. Apply a liberal bead of clear silicone RTV sealant to the pole top / pole bottom joint.
5. Using the 3/8 inch bolts, screw top and bottom pole sections together, alternately tightening to align the sections.
6. Remove the excess RTV sealant per the maker’s instructions.
7. Install the assembled pole following the “Critical Pole Instruction” sheet supplied with the hardware bag.
2. Locate the hardware bag which includes four 3/8" bolts.
3. Orient the pole top to the pole base so the fixture(s) can be installed in the proper locations.
4. Apply a liberal bead of clear silicone RTV sealant to the pole top / pole bottom joint.
5. Using the 3/8 inch bolts, screw top and bottom pole sections together, alternately tightening to align the sections.
6. Remove the excess RTV sealant per the maker’s instructions.
7. Install the assembled pole following the “Critical Pole Instruction” sheet supplied with the hardware bag.
WARNING!!! Do not lift from the top section. Apply lifting sling below the bolted joint and lift into place.
SSS Series Lighting Poles -- 2 Piece Pole Assembly
Hubbell Lighting, Inc.
A Subsidiary of Hubbell Incorporated
2000 Electric Way
Christiansburg, VA 24073-2500
(540) 382-6111
FAX (540) 382-1526
A Subsidiary of Hubbell Incorporated
2000 Electric Way
Christiansburg, VA 24073-2500
(540) 382-6111
FAX (540) 382-1526
268-1122-9901