husky-liners 6387 User Manual

6387 Front_Back.doc

09/17/03

CARE AND USE INSTRUCTIONS

     Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the

place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before

installing your new floor liner. However, do not remove the factory-installed carpeting.

     Your liner is made from an engineering resin that is lightweight and extremely tough and durable.

The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409

®

 or Glass

Plus

®

 work well. Use of Armor All

®

, Son-of-a-Gun

®

 or similar items is discouraged as these products

make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR SUPER

DUTY FORD TRUCK SECOND SEAT FLOOR LINER

FRONT OF VEHICLE

ON 2003_ AND NEWER MODEL YEAR FORD SUPER DUTY TRUCKS; FORD HAS
REPOSITIONED THE JACK TOOL POUCH TO A LOCATION UNDER THE REAR SEAT. YOUR
HUSKY LINER IS DESIGNED TO ACCOMMODATE THE RELOCATED TOOL POUCH.
INSTALLATION OF YOUR HUSKY LINER IS EASILY DONE BY FOLLOWING THESE SIMPLE
STEPS: FIRST, TRIM AWAY THE MATERIAL FROM THE TOP OF THE RAISED LOCATING
BOSS MOLDED INTO THE LINER (SEE DRAWING ABOVE). SECOND, REMOVE THE JACK
TOOL POUCH AND SECURING BRACKETS. THIRD, INSTALL YOUR LINER AND REPLACE
THE TOOL POUCH ASSEMBLY SECURING IN PLACE WITH THE ORIGINAL BRACKETS
AND WING NUT STUD. TO AID IN INSTALLATION, FIRST FOLD UP REAR SEAT BOTTOMS.
INSTALLATION PHOTOS ARE INCLUDED ON THE BACK OF THIS SHEET.

LOCATING BOSS