Belinea 101536 User Manual

 Belinea 10 15 36 - Operating Instructions - 3

The Belinea monitor is shipped with the standard desktop confi guration. However, you can optionally mount the 
device on a wall or on a monitor swivel arm (optional accessory). Please follow the corresponding instructions 
(4-hole assembly with a spacing of 75 × 75 mm) according to the international VESA FDMI standard).

•  First, unplug the power cord from the wall 

socket.

• 

If the LCD screen is extremely dirty, clean it with 
a moist cloth. Use only warm water and then wipe 
the monitor dry. Solvents or harsh cleaners can 
damage the housing. Clean the display surface 
only with a soft cloth, otherwise you may damage 
the display’s coating.

• 

If the monitor is only slightly dirty, clean it using 
a soft, dry and antistatic cloth.

• 

The LCD monitor’s screen surface is very sensi-
tive. Please avoid any contact with the surface 
(fi nger, pencil, etc.) and be especially cautious 
during transportation since jolts and shocks can 
cause the screen to become scratched (always 
use the original packaging).

•  The setup location must not be extremely hot, 

cold, humid or dusty. Heat and cold can impair 
the functionality of the monitor. Humidity and dust 
can cause the monitor to fail.

•  Don’t place the monitor near heaters such as 

radiators or the like. Don’t expose the monitor to 
mechanical vibrations or jarring.

• 

Position the monitor so that no direct light or sun 
strikes the screen, which could cause refl ections 
that reduce the quality of the image.

 

Only use the power cord designated for use in 
your country.

 

The wall outlet should be within easy reach. 
Pulling the power plug is the only way to 
disconnect the monitor from the power source.

•  This monitor is ENERGY STAR

®

-compatible. 

MAXDATA is an ENERGY STAR

®

 partner and 

guarantees that this device complies with the 
ENERGY STAR

®

 guidelines for optimizing power 

consumption.

 

The power cord must not be damaged. Do not 
place any objects on the power cord and make 
sure it does not have any knots. To unplug the 
cord, always pull on the plug and not on the cable 
itself. Damage to the power cord may result in fi re 
or cause electric shocks.

•  Avoid covering the ventilation slots. Air circula-

tion is necessary to prevent the monitor from 
overheating. If the air circulation is restricted it 
could cause fi re or damage the monitor.

•  Do not use any solvents to clean the monitor, 

as the housing could be damaged. For more 
information about cleaning the monitor, please 
see “Caring for Your LCD Monitor”.

 

Never open the monitor housing yourself. There 
is a danger of electric shock and other hazards. 
The monitor may only be opened and serviced 
by qualifi ed professionals.

 

All resolutions provided by the graphics card that 
deviate from the physical resolution of the panel 
are adjusted by interpolation. This can impair the 
image quality.

 

To protect your eyes, neck and shoulder muscles 
when working with a computer, we recommend 
that you maintain a viewing distance of between 
50 and 75 cm from the monitor. Furthermore, you 
should regularly focus on an object around 6 m 
away from you to help your eyes relax. Ergonomi-
cally, your posture is best when elbows, pelvis, 
knees and ankles are all at right angles.