paradox spectra 1689 User Manual

9.0 APPENDIX A

For Spectra 1689 LED Keypad only
Do not read the following if you have not read
these sections: 
•User Access Codes (see section 3.4)
•System’s Clock (see section 5.4)
•Auto-Arm Time (see section 4.9)

After entering the 3-digit section you wish to program, the
[

1] and  [

1] will flash. If a value is programmed, the

number corresponding to the first digit of the programmed
value will also illuminate. At this point, you can begin entering
the required data. After entering a digit, the number
corresponding to the following programmed digit will
illuminate and so forth. For example, if you wish to change
User Code 004 from 123456 to 454545, after entering section
[004], number  [1] will turn on. Press the  [4] button and
number [2] will turn on, then press the [5] button and number
[3] will turn on...
OR
After entering the desired 3-digit section and before entering
any data, press the [

] button to access the Data Display

Mode. The [

1] and [

1] Lights will illuminate. Once in

the Data Display Mode, pressing the [

] button will scroll

through the digits of the current section and the [

], [

] &

] Lights will flash. When viewing the last digit in the

section, pressing the  [

] button will automatically

advance to the next section. Press [

] to exit.