BOSS dvd5000brds User Manual
15
BASIC OPERATION
SWITCHING ON/OFF THE UNIT
Press PWR button on the front panel or
POWER button on the remote control
to turn on the unit.
Press PWR button on the front panel or
POWER button on the remote control
to turn on the unit.
FACEPLATE RELEASE
Press
Press
button on the front panel to
detach the removable faceplate.
SOUND ADJUSTMENT
Press SEL button on the front panel of
the unit or on the remote control to
select the desired adjustment mode.
The adjustment mode will change in the
following order:
Press SEL button on the front panel of
the unit or on the remote control to
select the desired adjustment mode.
The adjustment mode will change in the
following order:
For Electronic Volume:
By pressing the VOL
By pressing the VOL
/ VOL
buttons
on the front panel or VOL +/- buttons
on the remote control, it is possible to
adjust the desired sound quality.
For Encoder Volume:
By rotating the VOLUME knob on the
front panel or VOL+/- buttons on the
remote control clockwise or counter-
clockwise, it is possible to adjust the
desired sound quality.
on the remote control, it is possible to
adjust the desired sound quality.
For Encoder Volume:
By rotating the VOLUME knob on the
front panel or VOL+/- buttons on the
remote control clockwise or counter-
clockwise, it is possible to adjust the
desired sound quality.
LOUDNESS
Press and hold BND/MEN button on the
font panel for several seconds or press
MENU (BAND) button on the remote
control to reinforce the bass output.
Press BND/MEN button on the font
panel for several seconds again or press
MENU (BAND) button on the remote
control again torelease this function.
Press and hold BND/MEN button on the
font panel for several seconds or press
MENU (BAND) button on the remote
control to reinforce the bass output.
Press BND/MEN button on the font
panel for several seconds again or press
MENU (BAND) button on the remote
control again torelease this function.
SUBWOOFER
Press MOD (SW) button on the front
panel for several seconds to toggle sub-
woofer output. Press it for several
seconds again to release this mode.
Press MOD (SW) button on the front
panel for several seconds to toggle sub-
woofer output. Press it for several
seconds again to release this mode.
MUTE
Press and hold the PTY button on the
front panel or ENTER button on the
remote control for several secounds to
mute down the sound instantly. Press it
again to resume sound output.
Press and hold the PTY button on the
front panel or ENTER button on the
remote control for several secounds to
mute down the sound instantly. Press it
again to resume sound output.
EQUALIZATION
Press AUDIO button on the remote control
shortly to turn on equalization function
and to select desired audio mode. There
are three kinds of mode as below:
Press AUDIO button on the remote control
shortly to turn on equalization function
and to select desired audio mode. There
are three kinds of mode as below:
MODE SELECTION
Press MOD button on the front panel of
the unit or MODE button on the remote
control to select among radio, disc
(DVD/VCD/CD/MP3) play mode, CDC (or
DVD changer) mode and AV IN mode.
Press MOD button on the front panel of
the unit or MODE button on the remote
control to select among radio, disc
(DVD/VCD/CD/MP3) play mode, CDC (or
DVD changer) mode and AV IN mode.
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display of the front
panel.
Exhibit current frequency and activated
functions on the display of the front
panel.
FLASHING LED
If the front panel does not install in the
main unit, the LED will be flashing.
If the front panel does not install in the
main unit, the LED will be flashing.
REMOTE SENSOR
Point the remote control handset to the
remote sensor RX. Press the function
keys on the handset to control the
system.
Point the remote control handset to the
remote sensor RX. Press the function
keys on the handset to control the
system.
RESET FUNCTION
RESET button on the housing must be
activated with either a ballpoint pen or
thin metal object. The RESET button is
to be activated for the following reasons:
- Initial installation of the unit when all
RESET button on the housing must be
activated with either a ballpoint pen or
thin metal object. The RESET button is
to be activated for the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press RESET button, the unit
can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
- Error symbol on the display.
Note: if press RESET button, the unit
can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
VOL
BAS
TRE
BAL
FAD
(Volume)
(Bass)
(Treble)
(Balance)
(Fader)
OPERATION
FLAT
CLAS
POP
ROCK
DSP OFF