Becker traffic pro 7949 Operating Guide

106

The primary principle of voice mode is
that you can read out all the commands
you can see in the display.

In order to optimise the ability of the
voice control system to understand the
commands, please note:

• Speak continuously and at normal vol-

ume. Avoid long pauses and excessive
emphasis.

• Observe the instructions about the

position of the microphone in the
installation guide.

• Make sure that you speak as directly

as possible into the microphone. 

• Reduce interference by closing win-

dows, doors and the sliding roof.

• Avoid ambient noise in the vehicle

when entering voice commands (e.g.
conversations between other passen-
gers going on at the same time).

• Ambient noise increases the faster the

vehicle is travelling. You should
therefore speak more loudly at higher
speeds.

• Do not enter voice commands whilst

an announcement is being made. 

The voice control system becomes avail-
able shortly after the Traffic Pro is
switched on.

In order that conversations going on
inside the vehicle do not trigger the unit
accidentally, the voice control system
must first be activated before it can be
used.

X

Press the rotary control/push button

. 

The Traffic Pro displays a border around
the current display and prompts you to
make an entry by emitting a signal
tone

Ò. Voice dialogue starts.

Depending on the setting in “Automatic
dialogue” on page 96, a voice dialogue
will be started automatically when

, ,  

and  

are

pressed.