Becker traffic pro 7949 Operating Guide
99
Settings
Other settings:
• You can use
([WHUQDO GHYLFH
to specify
whether an AUX source is connected
to the Traffic Pro instead of a CD
changer.
to the Traffic Pro instead of a CD
changer.
• You can use
'D\QLJKWGHVLJQ
to config-
ure the settings for changeover
between day and night design.
between day and night design.
• You can use
5HVHWIXQFWLRQV
to reset the
Traffic Pro to the factory settings.
• You can use
'LUHFWLRQRIURWDU\DFWXDWRU
to specify the direction in which lists
and menus are scrolled when the
rotary control/push button is turned.
and menus are scrolled when the
rotary control/push button is turned.
Calling up the system settings
X
Press .
X
Turn the rotary control/push button
counter clockwise until
6\VWHP
VHWWLQJ
appears at the top right of the
display.
X
Press the rotary control/push button
.
X
Turn the rotary control/push button
to select one of the following options:
to select one of the following options:
$XGLR
,
([WHUQDOGHYLFH
,
'LVSOD\EULJKWQHVV
,
'D\QLJKWGHVLJQ
,
5HVHWIXQFWLRQV
or
'LUHFWLRQRIURWDU\DFWXDWRU
X
Confirm your selection by pressing
the rotary control/push button
the rotary control/push button
.
Audio
The Audio section includes system
settings for audio mode.
settings for audio mode.
GAL
GAL is a control circuit on the Traffic
Pro. This control circuit automatically
increases the volume of the Traffic Pro
depending on the speed of the vehicle.
You can define the extent to which the
volume should be increased depending
on the speed of the vehicle here.
GAL is a control circuit on the Traffic
Pro. This control circuit automatically
increases the volume of the Traffic Pro
depending on the speed of the vehicle.
You can define the extent to which the
volume should be increased depending
on the speed of the vehicle here.
X
Select
$XGLR
in the system settings.
X
Select
6SHHGGHSHQGHQWYROXPH
.
X
Turn the rotary control/push button
to select the required value.
to select the required value.
7014
7015
7016