kvh 01027702bk install User Manual
2-4
Mount the Antenna -
Hummer
Hummer
®
Mount Kit
If you are mounting the antenna to a Hummer roof
rack, follow the appropriate steps in this section for
your particular Hummer model:
rack, follow the appropriate steps in this section for
your particular Hummer model:
Hummer H2 . . . . . . . . . . . . . . . . . . . . . .See below
Hummer H3 . . . . . . . . . . . . . . . . . . .See page 2.14
Hummer H2 Mounting Instructions
1.
Position the roof rack crossbars 39
1
⁄
2
" apart,
measured center-to-center. Ensure that the
crossbars are securely fastened to the vehicle.
crossbars are securely fastened to the vehicle.
2.
Unlock and remove the end caps from both ends
of the crossbars.
of the crossbars.
3.
Remove the long rubber strips that run along the
top of the crossbars. Be sure to save these strips
for future use.
top of the crossbars. Be sure to save these strips
for future use.
4.
At each crossbar, insert two T-nuts into the center
channel and slide the nuts along the channel.
channel and slide the nuts along the channel.
5.
Reinstall the end caps that you removed in Step 2.
54-0350
2.12
TracVision A7 Installation Guide
Be sure the roof rack’s crossbars are
secured in place.
secured in place.
Center Channel
T-nut
Inserting T-nuts in Crossbar Center Channel