kvh 01027702bk install User Manual
2. The bottom of the antenna should rest a minimum
of 1" above the vehicle’s roof. If the antenna’s base
is less than 1" from the roof, you will need to add a
spacer under each bracket to raise the antenna
higher. If spacers are needed, follow the steps
below to install a spacer under each bracket:
is less than 1" from the roof, you will need to add a
spacer under each bracket to raise the antenna
higher. If spacers are needed, follow the steps
below to install a spacer under each bracket:
a. Remove the #8-32 x
3
⁄
8
" screws and washers
securing the factory-installed plastic spacer to
the metal bracket.
the metal bracket.
b. Insert a second spacer from the kitpack
between the original spacer and the bracket.
Secure both spacers to the bracket using the
#8-32 x 1" screws supplied in the kitpack and
the original washers that you removed in
Step a.
Secure both spacers to the bracket using the
#8-32 x 1" screws supplied in the kitpack and
the original washers that you removed in
Step a.
Adding a Second Spacer to the Bracket (If Needed)
2
Bracket
New Spacer
Flat Washer
Lock Washer
#8-32 x 1" Screw
Factory-installed
Spacer