Barnett Crossbows rhino crank cocking device User Manual

 

 

 

 

 
 
 

1. Remove the butt plate on the rear 
stock of your Rhino by removing the two 
Phillips head screws. 

 
 
 
 
 
→ 

2. Insert Rhino Crank Device unit on the 
rear stock of Rhino.  Attach unit with the 
two new screws included with the crank 
device shown in figure 1.  

Figure 1 

Figure 4 

 
 
 
 
 
 
 

 
 
 
 
 
 
 

1. To cock your crossbow using 
the Rhino Crank Device, first 
release the safety latch (on the 
crank).  Then pull the hooks until 
they reach the groove directly 
behind and below the scope-
mounting bracket. 
 
2. Place the rope into the groove. 
See Figure 2.  Continue pulling the 
hooks down and attach to string   
keeping hooks tight to flight track 
Reengage Crank safety. See 
Fig

 
-------------------------------------------------------------------------------------------- 

ure 3

. 

Figure 2 

Figure 3 

3.  Slowly crank the handle so that it moves in 
a forward rotation see figure 4.  The crossbow 
safety will engage when crossbow is cocked. 

 

4.  During shooting we recommend pulling 
the string hooks and rope backward off the 
crossbow and letting them hang fully 
extended below the back of the stock, or wind 
the rope and hooks back in. The crank handle 
can be rotated some to provide a comfortable 
shooting position

DO NOT FIRE your 

 

Barnett International Inc. 

Warranty Registration on opposite side