Becker indianapolis Operating Guide
Installation Guide
204
Using GPS for the first time, and sensors
•
Switch on the vehicle ignition to start using GPS for the first time
and for the sensor test. Switching on the unit. Enter the code (see
the operation guide for a detailed description).
and for the sensor test. Switching on the unit. Enter the code (see
the operation guide for a detailed description).
•
Press multifunction button
and multifunction button
at the same time.
•
This calls up the menu for the initial GPS start-up and for the sen-
sor test.
sor test.
•
Move the vehicle several metres forwards or backwards for the
speed signal function test.
speed signal function test.
•
Engage the reverse gear for the reverse signal function test.
The number under
Speed
must change (even at a low speed).
The number under
Speed
should not increase when idling or
pressing the accelerator when the vehicle is parked.
The arrows under
Direction
must change direction on en-
gaging the reverse gear.