Becker traffic assist pro Operating Guide
18
General operations
Battery quality declaration
The capacity of the rechargeable battery
in your mobile navigation system decre-
ases with every charging/discharging
cycle. Improper storage at excessively
high or low temperatures may also cause
a gradual deterioration of capacity. Con-
sequently, the operating time may be
substantially reduced even in the case of
a fully charged battery.
The rechargeable battery is designed
such that it should certainly still be pos-
sible for it to be charged and discharged
after 6 months of operation of your mo-
bile navigation system. In the event of a
significant loss of capacity, we recom-
mend replacement of the rechargeable
battery. Please contact your authorised
dealer. Use only genuine BECKER ori-
ginal spare parts.
in your mobile navigation system decre-
ases with every charging/discharging
cycle. Improper storage at excessively
high or low temperatures may also cause
a gradual deterioration of capacity. Con-
sequently, the operating time may be
substantially reduced even in the case of
a fully charged battery.
The rechargeable battery is designed
such that it should certainly still be pos-
sible for it to be charged and discharged
after 6 months of operation of your mo-
bile navigation system. In the event of a
significant loss of capacity, we recom-
mend replacement of the rechargeable
battery. Please contact your authorised
dealer. Use only genuine BECKER ori-
ginal spare parts.
Display quality declaration
In some cases, for technical reasons, a
few discoloured dots (pixels) may be vi-
sible on the display. Some pixels may
also appear brighter or darker. However,
such instances do not represent a product
flaw.
few discoloured dots (pixels) may be vi-
sible on the display. Some pixels may
also appear brighter or darker. However,
such instances do not represent a product
flaw.
Start-up
Once the Traffic Assist Pro has been un-
packed and checked for damage, the unit
can be started up. The individual start-up
stages are:
packed and checked for damage, the unit
can be started up. The individual start-up
stages are:
• Insert the SD memory card
• connect to power supply
• Switching on the unit
• Ensuring antenna reception (if navi-
gation is desired)
SD-Card
The card supplied with the unit has a
capacity of 2 GB and space for a set of
road maps and a limited number of MP3
files and/or images. The number of
music/image files that can be stored on
the card depends on the size of the files.
Alternatively, you can connect a USB
memory stick to the USB port to play
MP3 files or display images.
capacity of 2 GB and space for a set of
road maps and a limited number of MP3
files and/or images. The number of
music/image files that can be stored on
the card depends on the size of the files.
Alternatively, you can connect a USB
memory stick to the USB port to play
MP3 files or display images.
Note:
When the unit is switched on for the
first time, internal configuration takes
place. This takes several minutes. Do
not switch the unit off during this confi-
guration.
first time, internal configuration takes
place. This takes several minutes. Do
not switch the unit off during this confi-
guration.
Note:
Using USB memory sticks to play MP3
files or display images may
significantly decrease the capacity of
the battery.
files or display images may
significantly decrease the capacity of
the battery.
Note:
Using USB memory sticks (for MP3s)
may interfere with the GPS signal.
may interfere with the GPS signal.
Note:
A small slider is located on one side of
the card. If it´s pushed in arrow
direction the SD-card is safed against
overwriting.
the card. If it´s pushed in arrow
direction the SD-card is safed against
overwriting.
5013