Becker 4720 traffic pro Installation Guide
Subject to correction and technical modifications
30
Copyright by Becker GmbH, D-76303 Karlsbad
,QVWDOODWLRQJXLGH
0HFKDQLFDOVSHHGRPHWHUZLWKLQWHJUDWHGVSHHGVHQVRULQWKHVSHHGRPHWHUFDEOH
•
Remove the signal from the speed sensor, extend and connect to
socket A pin 1.
socket A pin 1.
•
Minimum requirement for the signal:
+]N+]VTXDUHZDYHVLJQDOQRLQGXFWLYHVHQVRU
+]N+]VTXDUHZDYHVLJQDOQRLQGXFWLYHVHQVRU
/RZOHYHO9KLJKOHYHO99
)
If you do not know the exact installation position / location
of the speed signal, please consult the vehicle manufactur-
er.
of the speed signal, please consult the vehicle manufactur-
er.
0HFKDQLFDOVSHHGRPHWHUZLWKRXWVSHHGVHQVRULQWKHVSHHGRPHWHUFDEOH
A speed sensor which generates a digital, speed-dependent signal must
be installed in the speedometer cable.
be installed in the speedometer cable.
The VDO adapter 2152.30300000 or a vehicle-specific adapter which
satisfies the minimum requirements can be used. The VDO speed sen-
sor is suitable for direct installation on the gearbox (no further installa-
tion parts required) or in the speedometer cable (in conjunction with
additional universal installation parts).
satisfies the minimum requirements can be used. The VDO speed sen-
sor is suitable for direct installation on the gearbox (no further installa-
tion parts required) or in the speedometer cable (in conjunction with
additional universal installation parts).
)
If the sealed speedometer cable is released, a correct dis-
play cannot be guaranteed. Incorrect installation leads to
improper functioning of the navigation system or of the
speedometer.
play cannot be guaranteed. Incorrect installation leads to
improper functioning of the navigation system or of the
speedometer.
*$/VLJQDO
$