Panasonic KX-TG1000N User Manual

Registration is necessary for optional handsets. The included handset is
pre-registered at the factory and assigned the handset number 1. Do not
try to register the handset number 1.
You can register up to 4 handsets at the base unit. Each optional handset
will be assigned a number at registration. The assigned number will be
used as the handset number (p. 56

–

61). Only one handset can be

registered at a time. 
Make sure the unit is in the standby mode initially. 

1

After charging the handset, the display
on the right will be shown.

2

Enter the 15-digit Base Unit ID code
located on the bottom of the base unit. 

•If you misdial, press 

. 

Digits are erased from the right.

3

Press .

•A beep sounds and “PLEASE WAIT!!” is

displayed.

4

Wait until a beep sounds on the handset
and base unit.

•After a few seconds, the handset number 

(1 to 4) will be displayed.

•If “BASE BUSY TRY LATER” is displayed in step 4, the unit is in use. Wait until

the unit is in the standby mode, and repeat steps from 2.

•If “ENTER BASE ID” is displayed in step 3, you entered a wrong Base ID code.

Enter the correct code.

)

(

)

(

ENTER BASE ID

###############

R

I

I

PLEASE

WAIT!!

HANDSET 2

FOUND

BASE

SEARCHING

FOR BASE

R