Furuno 1834C-BB User Manual

6. DATA TRANSFER 
 

 If the memory card was not inserted correctly, the message “FAILED TO DELETE 

MEMORY CARD.” appears. 

 

1.  Insert a formatted memory card into the slot. 

2. Press the MENU key followed by the E: SYSTEM CONFIGURATION, D: DATA 

TRANSFER, A: SAVE/LOAD DATA and C: SAVE DATA TO MEMORY CARD soft keys 

to show the SAVE DATA menu. 

3. Use the Trackball to select item to save. 

4.  Press the A: EDIT soft key. 

5. Use the Trackball to select ON. 

6.  Press the C: ENTER soft key. 

7.  Repeat steps 3 to 6 to choose other data to save if desired. 

8.  Press the B: SAVE soft key, then press the ENTER knob. The message “NOW SAVING 

DATA TO MEMORY CARD. DO NOT TURN OFF DISPLAY UNIT UNTIL 

COMPLETED.” appears. 

 

When saving is completed, “COMPLETED SAVING DATA. PUSH ENTER KNOB TO 

CONTINUE.” appears. Push the ENTER knob to continue. 

 

Various memory card messages appear to alert you to memory card-related error. These 

are tabulated below.   

 

Memory card is not 

inserted. Please insert 

memory card. Push 

ENTER knob to continue. 

Memory card not 

inserted. 

Push the ENTER knob to return to the 

SAVE DATA display and then insert card. 

Overwrite data? 

(Track)  

(Mark) 

(WPT) 

(Config) 

Data type to be 

recorded exists on 

memory card. (Two or 

more of same type of 

data cannot be 

recorded.) 

Push the ENTER knob to overwrite same 

data type on the card, or press the CLEAR 

key to escape. 

Failed to save data. Push 

ENTER knob to continue. 

Could not save data. 

Push the ENTER knob to continue.