Furuno 1834C-BB User Manual
1. OPERATIONAL OVERVIEW
1-14
1.10 Simulation Display
The simulation display, for use by service technicians for demonstration purposes, provides
simulated operation to help acquaint you with the many features your unit has to offer. It
allows you to view and control a simulated plotter, radar and sounder picture, without
position-fixing equipment, network radar or a network sounder. Most controls are operative,
thus you may practice setting destination, enter waypoints, measure range and bearing to a
target, etc. Three simulation displays are provided for both the radar and echo sounder.
The simulation icon (SIM) appears when any simulation mode is active.
To start the simulation display;
1. Press the MENU key.
2. Press the E: SYSTEM CONFIGURATION, C: SYSTEM SETUP and D: SIMULATION
SETUP soft keys in that order.
SIM
SETUP
SETUP
RADAR
LIVE
PLOTTER
LIVE
SOUNDER
LIVE
SPEED
00.0kt
COURSE
000.0
°
LATITUDE
45
°
35.000'N
LONGITUDE
125
°
00.000'W
START DATE & TIME
00:00 24.NOV.01
GET RADAR SIMULATION DATA
NO
RETURN
E
EDIT
A
Simulation setup menu
3. Follow appropriate procedure on the next several pages. To stop the simulation mode
and return to normal operation, choose LIVE for radar, sounder or plotter.
Radar
NavNet processor unit-generated echoes or user data
1. Select RADAR, then press the A: EDIT soft key.
1. Select RADAR, then press the A: EDIT soft key.
RADAR
▲
¡
BUILT IN DATA 1
¡
BUILT IN DATA 2
¡
USER DATA
¤
LIVE
▼
2. Select BUILT IN DATA 1 or 2 for internally generated echoes or USER DATA for
user-saved radar data. Push the ENTER knob.
3. Press the MENU key to close the menu.