Furuno 1834C-BB User Manual

3. PLOTTER OPERATION 

 

5.  Press the C: ENTER soft key. 

6. Press the MENU key to close the menu. 

 
Track plotting interval 

1. Press the MENU key followed by the A: CHART SETUP and B: TRACKS & MARKS 

CONTROL soft keys to open the TRACK CONTROL menu. 

2. Use the Trackball to select TIME INTERVAL or DISTANCE INTERVAL as appropriate. 

3.  Press the A: EDIT soft key to display the time or distance interval window, depending on 

what you selected at step 2. 

0

0m10s

(When selecting TIME INTERVAL.)

0

0.10nm

(When selecting DISTANCE INTERVAL.)

Setting range: 0 min 1 sec (continuous) - 99 min 59 sec
Default setting: 10 sec

Setting range: 0.00 nm (continuous) - 99.99 nm (km, sm)
Default setting: 0.

1 nm

TIME

 INTERVAL

DISTANCE

 INTERVAL

4. Use the Trackball to select digit and enter value with the alphanumeric keys. The D: 

CLEAR soft key functions to clear an entire line of data. 

5. Push the ENTER knob or C: ENTER soft key. 

6. Press the MENU key to close the menu. 

 

The equipment stores a total of 8000 points of track and marks. This amount may be 

distributed as desired, and the default setting is 2000 points of track and 6000 points for 

marks.  

 

When you change the track memory setting, all tracks and marks in the memory are erased. 

If necessary save the data to a memory card. For further details see the paragraph “6.1.2 

Saving data to a memory card.” 

 

1. Press the MENU key followed by the A: CHART SETUP and B: TRACKS & MARKS 

CONTROL soft keys to open the TRACK CONTROL menu. 

2. Use the Trackball to select MEMORY (TRACK & MARK). 

3.  Press the A: EDIT soft key to display the track memory window.   

2

000/8000 POINTS

      TRACK MEMORY

4. Use the Trackball to select digit and use the alphanumeric keys to enter value.