Pentax q Operating Guide

169

Pl

ayb
ack F
unc
tion

s

6

3

Connect the other end of the cable to the video input terminal 

on the AV device.

4

Turn the AV device and camera on.

The camera turns on in video mode or HDMI mode, and the camera 

information is displayed on the screen of the connected AV device.

Set the video/HDMI output format according to the connected terminal.

Normally, the default output format setting does not have to be changed. 

However, if it fails to play back images/movies properly, change the setting.

When the hometown is set at the time of initial setting (p.48), the video 

output format is set in accordance with that region. Depending on the 

country or region, images/movies may fail to be played back with the set 

video output format. If this happens, change the setting.

1

Select [Video Out] in the [R Set-up 2] menu, and press 

the four-way controller (5).

2

Use the four-way controller (23) to select [NTSC] or [PAL], 

and press the 4 button.

3

Press the 3 button.

The screen that was displayed before selecting the menu appears again.

When using the video output, images/movies are output at normal resolution 

regardless of the resolution supported by the AV device. To output HD video, 

use the HDMI output or transfer to and play back on a computer.

Setting the Video/HDMI Output Format

To change the setting, remove the cable first before proceeding.

Selecting the Video Output Format

PENTAX Q_ENG.book  Page 169  Monday, August 29, 2011  8:43 AM