Pentax q Operating Guide

233

Ap

pe

nd

ix

11

Not enough battery

power remaining to

update the firmware

Appears when trying to update the firmware if the 

battery level is insufficient. Install a fully charged 

battery, or use the AC adaptor kit K-AC115 

(optional). (p.40)

Unable to update firmware.

There is a problem with the 

firmware update file

Unable to update the firmware. The update file is 

damaged. Try downloading the update file again.  

Image folder cannot be 

created

The maximum folder number (999) and file 

number (9999) are being used, and no more 

images can be saved. Insert a new SD Memory 

Card or format the card. (p.198)

Unable to store image

The image could not be saved because of an SD 

Memory Card error.

Settings not stored

The DPOF settings could not be saved because 

SD Memory Card is full. Delete unwanted images 

and perform DPOF setting again. (p.165)

The operation could not be 

completed correctly

The camera was unable to measure the manual 

white balance (p.125) or use HDR Capture 

(p.130). Try the operation again.

No more images can be 

selected

You cannot select 100 or more images at a time 

for Index (p.160) and Select & Delete (p.165).

No image can be processed

There are no images that can be processed 

using Digital Filter (p.174) or RAW Development 

(p.180) function.

This image cannot be 

processed

Appears when you try to perform Resize (p.172), 

Cropping (p.173), Digital Filter (p.174), Red-eye 

Edit (p.179) or RAW Development (p.180) for 

images captured with other cameras, or when 

you try to perform Resize or Cropping for 

minimum file size images.

The camera failed to create

an image

The creation of an index print image failed. 

This function is not available

in the current mode

You are trying to set a function that is not 

available when the capture mode is set to n 

(Auto Picture), H (Scene) or C (Movie) mode.

The camera will turn off

to prevent damage from

overheating

The camera will turn off because its internal 

temperature gets too hot. Leave the camera 

turned off until it has had time to cool down 

before turning on the camera again.

Error Messages

Description

PENTAX Q_ENG.book  Page 233  Monday, August 29, 2011  8:43 AM