Pentax q Operating Guide
79
Sh
oo
ting
Fu
nctio
ns
nctio
ns
4
This allows you to deliberately overexpose (brighten) or underexpose
(darken) your picture.
The compensation value can be set in increments of 1/3 EV or 1/2 EV
between -3 and +3 depending on the lens being used.
1
Press the mc button (1),
and then turn the e-dial (2).
The exposure is adjusted.
EV bar is displayed on the monitor during
adjustment.
Press the mc button to not show the bar.
Press the mc button to not show the bar.
Adjusting the Exposure
Step Interval
Exposure Setting Value
1/3 EV
±0.3, ±0.7, ±1.0, ±1.3, ±1.7, ±2.0, ±2.3, ±2.7, ±3.0
1/2 EV
±0.5, ±1.0, ±1.5, ±2.0, ±2.5, ±3.0
• EV Compensation is not available when the capture mode is set to a (Manual).
• The set compensation value is not canceled by turning the camera off or by
• The set compensation value is not canceled by turning the camera off or by
switching to another capture mode.
• If [Green Button] is assigned to the d/i button in [Green Button] of the
[A Rec. Mode 3] menu (p.144), the compensation value is reset to 0.0 when
the d/i button is pressed.
2
1
1/
2000
1/
2000 F2.8
F2.8
1600
1600
[ 37]
[ 37]
+1.7
EV
+1.7
EV
EV bar
PENTAX Q_ENG.book Page 79 Monday, August 29, 2011 8:43 AM