Pentax GR II Operating Guide
131
4
M
ak
ing U
se of I
mages
Saving Images to a Computer
Use the supplied USB cable to connect the camera to a computer.
1
Turn off the power of the camera.
2
Open the terminal cover, and connect
one end of the USB cable to the USB/
AV OUT terminal on the camera and
the other end to the computer.
The camera turns on and “Connecting to
PC…” appears on the picture display.
The camera is recognized by the computer as
The camera is recognized by the computer as
a removable disk.
The files on the memory card are displayed when a memory card is inserted.
The files on the memory card are displayed when a memory card is inserted.
When a memory card is not inserted, the files on the internal memory are
displayed.
3
Copy and save images to the computer.
4
Disconnect the USB cable from the computer when the saving is
complete.
5
Disconnect the USB cable from the camera.
The camera turns off automatically.
Note -----------------------------------------------------------------------------------------------------------
• The battery is charged when the camera is connected to the computer.
• If the battery level is low, it may take some time until the camera is recognized by the computer.
• If the battery level is low, it may take some time until the camera is recognized by the computer.
Caution -------------------------------------------------------------------------------------------------------
• Do not disconnect the USB cable during image transfer.