Pentax GR II Operating Guide

If an error message is displayed, take the steps listed below.

Error message

Cause and solution

Page

Insert card.

No memory card inserted. Insert the card.

Set the date, time and format.

Date is not set. Set the date.

FILE NUMBER OVER

The file number limit has been exceeded. Reset the file numbers or use another 

memory card.

Unmatched File

The camera cannot display this file. Check the file contents on a computer, and 

then delete the file.

—

Protected

The file selected for deletion is protected.

Card Is Write-Protected.

The card is locked. Unlock the card.

—

This file (movie or other file) can-

not be selected for printing.

Print settings cannot be set for the selected file.

Insufficient Memory

The file cannot be saved in the memory. Delete existing files or use a new 

memory card.

Maximum number of images are selected for printing.

—

Format internal memory.

You must format the internal memory. Format the internal memory in [Format 

[Internal Memory]] of the [Setup] menu.

—

Format the card.

The memory card is not formatted. Format the card in this camera.

Card Error

Format the memory card again. If, after formatting the card, the error message 

still appears, the card may be faulty. In this case, do not use the card.

File not found

No files are available for playback.

—

Out of memory. Cannot record.

The memory is full. Use another memory card, or remove the card and use the 

internal memory.

—

This function cannot be used cur-

rently.

The pixel mapping cannot be performed because the camera or battery is hot. 

Turn off the camera and wait until the temperature of the camera or battery 

drops to a normal temperature.

—