Pentax WG-30 Operating Guide
36
1
Get
ting St
ar
te
d
1
Open the battery/card cover.
Press the battery/card cover lock lever in the direction shown 1, slide the cover
towards 2 and open it towards 3.
towards 2 and open it towards 3.
2
Insert the SD Memory Card into the SD Memory Card socket
so that the label is facing toward the front of the camera (the
side with the lens).
so that the label is facing toward the front of the camera (the
side with the lens).
Push the card in all the way. Images may not be recorded correctly if the card is
not inserted all the way.
To remove the SD Memory Card, push it in once and then pull it out.
not inserted all the way.
To remove the SD Memory Card, push it in once and then pull it out.
3
Close the battery/card cover.
Push down and slide the battery/card cover with steady but gentle force in the
opposite direction indicated by 2.
opposite direction indicated by 2.
If the battery/card cover is not locked securely when you close it, water, sand,
or dirt may get into the camera.
or dirt may get into the camera.
• The image file size varies depending on the number of recorded pixels and
the number of images that can be saved on an SD Memory Card also varies.
• Set the number of recorded pixels for still pictures from the [A Rec. Mode]
menu and for movies from the [C Movie] menu.
• For an approximate number of still pictures and amount of time of movies that
can be saved on an SD Memory Card, see “Main Specifications” (p.188).
SD Memory Card
Battery/card cover
SD Memory Card
socket
socket